Laboratory Independent Single Screw Extruder

• After-sales Service: a Lifetime
• Warranty: 1 Year
• Certification: CE
• Condition: New
• Customized: Non-Customized
• Automatic Grade: Automatic
• Structure: Horizontal
• Motor: AC Inverter
• Screw Diameter: 20mm or 25mm
• Screw L/D: 25:1 or 30:1
• Output: 5kg/Hour
• Motor Power: 1.5kw
• Max.Temperature: 350
• Max.Presssure: 100bar
• Max.Speed: 100rpm
• Cooling: Compressed Air
• Transport Package: Plywood
• Trademark: Hapro
• Origin: China
• HS Code: 9024800000
• Production Capacity: 100/Year

Product Description

This equipment is a small extruder for laboratory use, with its own motor and data measuring device, can be used independently, installation of different molds and with other auxiliary machines can be completed in the laboratory casting film, blowing film, pressure light or flow type impurity measurement, plastic granulation and other functions.

Photograph	Performance Index	Performance Parameter
	Control interface	HMI
	Motor	AC inverter
	Motor power	1.5 kW
	Reducer	TCG
	Speed ratio	1:15
	Screw speed	100 r/min
	Screw Diameter	20mm
	Screw L:D	25 :1
	Compression Ratio	2.4:1or 3.6:1
	Speed Range	1-100 rpm
	Heating	Electrical Heating,PID,4 Zones
	Temp control system	RKC from Japan
	Heating zone	4 Zones
	Max. Temperature	350ºC
	Heating power	3 kW
	Temperature sensor	J type thermocouple
	Cooling	compressed air cooling
	Pressure Accuracy	0.5%F.S
	Pressure Range	0.1 ~ 100 Mpa
	Output	1 -5 kg/ hr
	Feeding speed	Manual adjustment
	Feeding	Screw metering feed
	Power supply	3×380V,50/60 Hz ,+N +PE
	Dimension(L×W×H)	1000×400×350 mm
	Weight	150 kg
	Dies head (Select two from four)	Capillary Die (InnerФ1.0,Ф1.27,Ф2.0 L:D:20/1,30/1,40/1)
		Flat Die( L×W:60×1.5 mm, 0.8 kW)
		Pipe Die(Inner Ф10, Outer Ф12.5)
		Coating Wire Die (Core Ф1.5,Die outlet Ф4.0)