Parallel Twin-Screw Counter-Rotating Extruder of Laboratory Extrusion Torque Rheometer

• After-sales Service: a Lifetime
• Warranty: 1 Year
• Certification: CE
• Condition: New
• Customized: Non-Customized
• Automatic Grade: Automatic
• Structure: Block Assembly
• Screw Diameter: 25mm
• Screw L:D: 28:1
• Heating: Electrical Heating/6 Zones
• Max. Temperature: 350
• Max.Screw Speed: 200 R/Min
• Cooling: Air Compression
• Output: 1 -10 Kg/ Hr
• Transport Package: Plywood
• Trademark: Hapro
• Origin: China
• HS Code: 9024800000
• Production Capacity: 100/Year

Product Description

The extrusion molding process is suitable for all polymer materials, which is the largest production variety in polymer processing, the maximum number of production, high productivity, strong adaptability, widespread use and the maximum proportion of production. The products of plastic extrusion are pipes, plates, pieces, films, monns, cable coating, various profiles and plastic and its materials. In addition, the extrusion process is also commonly used in the color of plastic, mixing, plasticization, granulation and plastic, etc., which is based on extrusion forming, and the technology of blowing, stretching, impurity measurement, etc., and developing into extruding, blowing molding and stretching film.
The laboratory is a kind of efficient mixing and extruding device, which can be used to form various small experimental lines with different molds and auxiliers, which can be used to implement various thermoplastic materials, pipes, extrusions and mixed grains.



Parallel Twin-screw platform is consist of the Drive device, Feeding device, Barrel ,Twin-screw and Dies parts, etc. The Twin-screw is the heart of the extruder, divided into the charging section (solid conveying zone), compression section(melting zone) and the homogenization section (the melt conveying zone) three parts. Put the material into the hopper ,under the action of a rotating screw, material was pushed on to direction of the nose. Material endures strong shear, mixing and calendaring in the barrel, In this process, Meanwhile, the physical states of material the evolve from glass state to the high elastic state ,eventually become sticky flow pattern .

•  

• Technical parameters:

• Photograph	Performance Index	Performance Parameter
  	Screw Diameter	25 mm
  	Screw L:D	28:1
  	Screw material	Available
  	Temp control system	RKC from Japan
  	Temp sensor	J type thermocouple
  	Heating	Electrical Heating/6 Zones
  	Heating power	4.8kW
  	Max. Temperature	350ºC
  	Max. speed of screw	200 r/min
  	Cooling	Air Compression
  	Pressure range	0~100 Mpa
  	Feeding speed	Manual adjustment
  	Feeding	Screw metering feed
  	Output	1 -10 kg/ hr
  	Die heads (Select one from three)	Flat Die ( L×W:45×2.4 mm,0.8kW)
  		Pipe Die (Inner Ф10, Outer Ф12.5, 0.6 kW )
  		Granulating Die( Ф3×2)
  	Weight	200 kg
  	Dimension (L×W×H)	2000×500×1550 mm