Laboratory Thermoplastic Polymer Film Blowing Machine

• Customization: Available
• After-sales Service: a Lifetime
• Warranty: 1 Year
• Certification: CE
• Condition: New
• Customized: Non-Customized
• Automatic Grade: Automatic
• Structure: Block Assembly
• Film Fold Diameter: 50~120mm
• Film Thickness: 0.02-0.3mm
• Film Blowing Die: 40 mm
• Gap of Die Lip: 0.6~1.0mm
• Diameter of Traction Roller: 120mm
• Diameter of Crimp Roller: 120mm
• Transport Package: Plywood
• Trademark: Hapro
• Origin: China
• HS Code: 9024800000
• Production Capacity: 100/Year

Product Description

The forming principle of film blowing system is that material have been melt and quantitative extrusion by the film blowing die in the single screw extruder ,Then through ring cooling wind, blowing the herringbone plate, traction roller, coiling roller,Eventually made into film.

 

Correct mold eccentricity : the material added to the feed hopper, when the temperature of the districts all reach the set value when start the motor torque observation experiments at the same time, when the material flows from blown film die, observe the flow velocity in all directions, remember the position at fast speed, stop the motor, loosen screw mould upper end fixed die, adjusting the mold around four top silk, slightly loosen the first fast speed wire across the top, top tight again fast speed on the side of the top silk, after the completion of the adjustment, twist screws fixed die;

Photograph	Performance Index	Performance Parameter
	Film blowing die	Ф 40 mm
	Power of Die Heating	1.0 kW
	Gap of die lip	0.6~1.0mm
	Film fold diameter	50~120mm
	Film thickness	0.02-0.3mm
	Diameter of traction roller	120mm
	Diameter of crimp roller	120mm
	Roller Speed	0-140 mm/s
	Take off	Gravity charge
	Power supply voltage	3×380V,50/60 Hz ,+N +PE
	Weight	200kg
	Dimension (L×W×H)	1000×600×2300 mm